Dev Enterprise

wall tie pvc sleeve remover use for pvc sleeve pusher                                 

PVC Wall Tie sleeves are used on plain-ended wall ties at vertical movement joints that abut columns. The tie will restrain the masonry against lateral wind loads but the sleeve will allow the masonry to expand or contract.

PVC Wall ties should be installed with a 10mm gap at the end of the sleeve to allow for expansion of the masonry.

PVC Wall ties require 100mm embedment. A 120mm long sleeve will provide an allowance for movement and tolerance, and will be suitable for most applications. Other lengths and sizes available to special order.

Wall ties are manufactured from corrosion-resistant for stainless steel and are suitable for use in housing an commercial applications.

We have dealers across Mumbai, Pune, Kolhapur, Solapur Delhi, Bangalore, Hyderabad, Kolkata, Raipur, Kota, Udaipur, Rourkela, Patna, Indore, Vijayawada, Vizag, Chennai, Kolkata, Surat, Vadodara, Ahmedabad, Rajkot, Mysore, Hubli, Mangalore,